Purpose
Use this guide for the supplier's communication settings in Optiply. Keep the agreed supplier identifier ready so you can check the saved value against it.
Before you start
- You have permission to edit the supplier.
- The supplier supports the required EDI process, and its GLN has been confirmed.
- The EDI connection has been configured and document exchange tested.
- Monitoring and error handling are available for the connection. If you are unsure about these arrangements, contact Support before using EDI for orders.
Steps
- Open Suppliers and select the supplier.
- Open Communication and select Edit.
- Choose EDI as the Order Placement Method.
- Enter the supplier's Global Location Number (GLN) with exactly 13 digits.
- Select Save and review the displayed method and GLN.
The connection and document-exchange tests are separate from these settings. Confirm they are complete before relying on EDI for orders.
Fields: settings explained
- Order Placement Method: select EDI for the separately arranged EDI workflow, rather than Email or None.
- GLN: the agreed supplier Global Location Number. Enter exactly 13 digits and check that the number belongs to the intended supplier, not another supplier.
Expected result
The supplier's communication settings display the saved EDI method and GLN. Compare both values with the method and identifier you intended to save.
Limitations
Saved settings are not confirmation of connection health, document delivery or supplier acceptance of an order.
Troubleshooting
If you cannot edit the supplier, check your access. If the GLN is invalid, check the agreed 13-digit identifier. If connection or delivery is uncertain, contact Support before relying on the configuration.
Need to arrange the connection first?
Use EDI setup: introduce your supplier to start the coordination conversation before configuring the supplier's communication settings.