# Stock position: free stock and incoming supply

Stock position in Optiply is your **Free stock** plus your **Incoming stock**: the stock available now plus the stock you ordered that is not received yet. The product page counts all qualifying incoming stock, and purchase advice does the same unless time-dependent stock position is enabled.

## What stock position means in Optiply

Stock position in Optiply is one of four related stock quantities for a product. The table lists each quantity and what it describes.

| Quantity | What it describes |
|---|---|
| Physical stock | The stock on your shelves |
| **Free stock** | The available quantity your connected system reports to Optiply |
| **Incoming stock** | Open purchase orders that are not received yet |
| **Stock position** | **Free stock** plus qualifying **Incoming stock** |

Use the same product and stock unit when you compare these values.

Optiply adds **Free stock** and the counted incoming stock as they are and does not raise the sum to zero. **Stock position** is therefore negative when negative **Free stock** is larger than the incoming stock counted. When **Free stock** is missing, the product page shows no **Stock position** either.

## How Optiply uses stock position on the product page and in purchase advice

On the product page, Optiply calculates **Stock position = Free stock + Incoming stock**, with all qualifying incoming stock included.

Purchase advice in Optiply can use a more time-sensitive stock position. With time-dependent stock position enabled, purchase advice adds only the incoming stock inside the applicable order cycle to free stock. The **Incoming stock** column in the purchase editor then holds that in-cycle quantity. The applicable order cycle does not always have the same length. For example, an ordinary forecast cycle with a 10-day lead time and a 7-day reorder period spans `10 + 7 = 17` days. Without that setting, purchase advice adds the on-order quantity: all qualifying incoming stock, the same as the product page. A delivery outside the order cycle can remain visible as **Incoming stock** without reducing the replenishment gap of this order cycle.

With time-dependent stock position enabled, the product page and purchase advice can use different stock positions for the same product, and that difference is expected.

Optiply compares the stock position used for purchase advice with the replenishment target, shown as **Order up to**. The difference, never below zero, is the starting replenishment gap. Final purchase advice also takes purchasing conditions into account. Neither the **Stock position** on the product page nor a simple subtraction tells you the final order quantity on its own.

## Example: bike lights with part of the incoming stock outside the order cycle

This example uses made-up numbers. You sell bike lights. All quantities use the same stock unit, **Free stock** has a value, and purchasing conditions are not applied yet.

- **Free stock**: 40 units
- **Incoming stock**: 60 units. 20 of those units are expected inside the applicable order cycle, the other 40 units after it
- Replenishment target (**Order up to**): 90 units

With time-dependent stock position enabled:

1. The product page counts all incoming stock: **Stock position** is `40 + 60 = 100` units.
2. Purchase advice counts only the 20 incoming units inside the order cycle: its stock position is `40 + 20 = 60` units.
3. The starting replenishment gap is `max(0, 90 − 60) = 30` units.

Now time-dependent stock position is off. All 60 incoming units count as on order, so the purchase advice stock position is `40 + 60 = 100` units and the starting replenishment gap is `max(0, 90 − 100) = 0` units.

In both cases **Free stock** stays at 40 units: the setting changes which incoming stock counts, not the stock you hold.

In Optiply, the product page shows a **Stock position** of 100 units in both cases.

## Where to find stock position in Optiply

Open **Products**, open the product and go to the **Product** tab > **Stock info** section to compare **Free stock**, **Incoming stock** and **Stock position**.

- For ignored products, and for assembled products without assembly enabled, these stock position fields are disabled.
- A missing value shows as `–`. A missing value is not a confirmed zero.
- A negative **Free stock** can indicate customer commitments beyond the stock available, or incorrect stock data. Its meaning depends on your connection's stock mapping. This does not guarantee purchase advice, because supplier eligibility and purchasing conditions still apply. For example, a supplier **Stock availability** limit of zero can keep the advised quantity at zero.
- With time-dependent stock position enabled and incoming stock outside the lead time, a small boxes icon shows beside **Incoming stock**. The icon opens a breakdown per supplier with **Within lead time** and **Outside lead time** quantities, and it can offer **View all orders**.
- The link to deliveries also requires the relevant permissions.
- The incoming stock breakdown is not an export of stock position at an earlier moment or per supplier. For such an export for one supplier's products, ask Support whether your account has it and how its date and supplier filter work.

## How to check whether purchase advice uses time-dependent stock position

The stock position numbers alone do not show whether purchase advice uses time-dependent stock position. To check, select the relevant webshop, then go to **Settings** > **Inventory control** > **Time dependent stock position**. The setting is read-only for you, and blocked in Optiply Lite. Contact your customer success manager if this setting needs changing.

## How to correct a stock position that looks wrong in Optiply

When a stock position value in Optiply differs from what you expect, check where the difference comes from before you correct anything.

- **Stock position differs from the stock in your WMS**, for example 46 against 8, or shows 0. Compare your WMS stock with **Free stock**, not with **Stock position**. **Stock position** adds the incoming stock Optiply counts, so check **Free stock** and **Incoming stock** one at a time.
- **Stock position differs from Free stock although you see no open purchase orders.** **Stock position** adds the incoming stock Optiply counts to **Free stock**. Check **Incoming stock** for the product, and check whether purchase advice uses time-dependent stock position. Support then reconciles the product's stock, reservations, incoming records and the time of the advice.
- **Stock position changed although nothing was sold or received.** **Stock position** changes when one of its inputs changes: **Free stock**, or the incoming stock Optiply counts. Compare values from the same moment and with the same setting.

- **Free stock differs from your connected system.** Compare **Free stock** with the stock field and warehouses your connection uses. Check whether reservations are already deducted and which connected system owns the value before you correct it there.
- **The quantities differ in size.** Compare the product's unit.
- **Incoming stock differs from your open orders.** Compare **Incoming stock** with your open purchase orders that are not received yet.
- **Purchase advice and the product page use different stock positions.** Check the delivery timing and the in-cycle breakdown before you assume that all incoming stock should reduce the current purchase advice.

## How stock position differs from the supplier's stock availability limit

Optiply builds stock position from your own stock: your **Free stock** plus qualifying **Incoming stock**. The supplier's **Stock availability** limit can reduce the proposed purchase quantity without changing your product's **Free stock** or **Stock position**.

## Questions customers ask about stock position

### Why does the stock position differ from the free stock when there are no open purchase orders?

**Stock position** in Optiply is **Free stock** plus the incoming stock Optiply counts, so check **Incoming stock** for the product first. Also check whether purchase advice uses time-dependent stock position, and ask Support to reconcile the product's stock, reservations and incoming records.

### Why is the stock position in Optiply different from the stock in my WMS?

Compare the stock in your WMS with **Free stock** in Optiply, not with **Stock position**. **Stock position** adds the incoming stock Optiply counts to **Free stock**, so check **Free stock** and **Incoming stock** one at a time.

### What does time-dependent stock position mean?

With time-dependent stock position enabled, Optiply's purchase advice adds only the incoming stock inside the applicable order cycle to **Free stock**. Without that setting, purchase advice counts all qualifying incoming stock, the same as the product page.

## Related articles on free stock, the replenishment target and incoming stock

- [Free stock and physical inventory](/article/free-stock-physical-inventory)
- [Order-up-to level](/article/order-up-to-value)
- [Covered by incoming](/article/covered-by-incoming)
