# Order-up-to level: the target behind purchase advice

The order-up-to level, shown in Optiply as **Order up to**, is the calculated inventory target behind a product's purchase advice. Optiply subtracts the product's **Stock position** from **Order up to**, with a minimum of zero, to get the base replenishment quantity. Purchasing conditions such as MOQ and lot size can then change the final purchase quantity. **Maximum stock level** is a separate manual limit that can cap the advised quantity.

## What Order up to means in Optiply

**Order up to** is the calculated stock level that Optiply plans a product towards. **Order up to** covers demand over the applicable planning period with the relevant buffer. For the ordinary forecast cycle, that period is the lead time plus the effective reorder period, for example 10 + 7 = 17 days. A manual reorder period replaces the advised one, and Optiply Lite uses the coverage period instead.

In plain words, **Order up to** is the full stock target for that period: expected demand plus protection for the desired service level. Where they apply, adjustments for incoming deliveries or lost sales also change **Order up to**.

## How Optiply uses Order up to in purchase advice

Optiply compares the applicable **Order up to** with the product's **Stock position**. Stock position is free stock plus qualifying incoming stock. When time-dependent stock position is enabled, purchase advice counts only the incoming stock inside the order cycle.

The base replenishment quantity is **Order up to** minus **Stock position**, with a minimum of zero:

`Base replenishment quantity = max(0, Order up to − Stock position)`

Which **Order up to** applies depends on the purchase moment. Regular purchase moments, including a regular purchase moment brought forward, use the regular **Order up to**. Other purchase moment types use a separate emergency **Order up to**. The advice line shows the **Order up to** it used, without a label that says which type it is.

**Adjust order** > **Adjust order size** in the purchase order editor can also change the **Order up to** used for that purchase moment. It applies an order-size factor to the target before Optiply calculates the quantities.

### Purchasing conditions applied after the Order up to comparison

After Optiply compares **Order up to** with **Stock position**, purchasing conditions can still change the proposed quantity. That is why the advised quantity can differ from **Order up to** minus **Stock position**. These conditions include MOQ, lot size, economic order quantity, minimum order value and the supplier's **Stock availability** limit. They also include a manual minimum stock or **Maximum stock level**, product or supplier state, and manual changes. These purchasing conditions are separate from **Order up to**.

### How Covered by incoming affects Order up to

Where available, expected deliveries can cover part of the demand during the replenishment period after the lead time. Time-dependent stock position must be enabled for this, but it is not the only condition. **Covered by incoming** shows that coverage: the demand those deliveries are expected to serve, rather than simply the sum of all open orders. Where **Order up to** or the purchase advice already includes this adjustment, do not subtract **Covered by incoming** again.

## Example: Order up to of 140 units for coffee beans

This example uses made-up numbers. You sell bags of coffee beans, counted in units of one bag, and you buy them from one roaster. The product shows:

- **Order up to:** **140 units**
- **Stock position:** **90 units**, in the same stock unit

The **Order up to** target is an input to this example: the example shows how Optiply uses the 140 units, not how Optiply calculates them. The example applies before any purchasing condition, such as MOQ or lot size, changes the proposed quantity.

1. Optiply subtracts **Stock position** from **Order up to**: `140 − 90 = 50`.
2. The result is above zero, so the base replenishment quantity is **50 units**: `max(0, 140 − 90) = 50 units`.
3. Optiply does not add safety stock a second time on top of the target.

Now the coffee beans' **Stock position** is **150 units** instead of 90, with the same **Order up to** of 140 units: `max(0, 140 − 150) = 0`. The result is **zero base replenishment**. The calculation does not produce a negative purchase order.

For the coffee beans, check the proposed quantity in the purchase advice before you place the order.

## Where to find Order up to in Optiply

Open **Products**, open the product and go to the **Supply chain** section on the **Product** tab. The **Supply chain** section can show the calculated target as **Order up to**.

**Order up to** also appears in two other places in Optiply:

- In the purchase order editor, as a column, when you select **Order up to** in the column view.
- In the advised-quantity side panel. To open it, click a line's quantity, then **Original advised quantity**.

**Order up to** is read-only: you cannot edit it as a standalone manual quantity. When **Order up to** is unavailable, the **Supply chain** section shows a dash ("–"). That happens when Optiply calculates no target, for an assembled product without assembly enabled, or when the product has no active supplier. The dash does not say which cause applies. Start by checking that the product has an active supplier, which you can check yourself.

## How to check an Order up to value in Optiply

To understand a product's **Order up to** in Optiply, compare it with the product's **Stock position**, then review the forecast, service level, lead time and reorder period.

Service level, lead time, effective reorder period and forecast demand can affect **Order up to**. Optiply applies purchasing conditions such as MOQ, lot size and manual stock constraints separately when it calculates the proposed purchase quantity. A correction to one of the inputs that feed **Order up to** can change **Order up to**, but not always right away or by a predictable amount.

**Order up to** is not simply a multiple of the monthly sales you see. If **Order up to** differs from the displayed forecast, check whether the two cover the same period, and whether a buffer or incoming-delivery coverage (**Covered by incoming**) is involved. The displayed forecast plus the **Buffer** field need not equal **Order up to**: their periods and buffer breakdown can differ.

When a product shows an **Order up to** of 0, check its forecast and its number of days with sales. Optiply treats a product as established after sales on at least 5 different days in the previous year. Products with shorter qualifying sales history may use a fallback forecast, capped by their recent average daily demand. High sales on a single day do not count as a long sales history. A shorter history does not guarantee a nonzero forecast or target.

ABC or ABC-XYZ classification and desired service levels are planning inputs. They do not translate into a fixed table of quantities to purchase.

## How Order up to differs from Maximum stock level, stock position and the purchase quantity

- **Order up to and Maximum stock level.** **Order up to** is the calculated target in a product's **Supply chain** section. **Maximum stock level** is an optional manual constraint in the product settings, one of the purchasing conditions Optiply applies to the proposed quantity. When **Stock position** already reaches **Maximum stock level**, the advice is 0. Otherwise Optiply limits the quantity to the gap up to **Maximum stock level**. MOQ and lot-size rounding come after that limit, so the final quantity can end above **Maximum stock level**.
- **Order up to and safety stock.** **Order up to** is the overall target. The displayed safety stock is the part of **Order up to** above the expected demand for the cycle. By default it is zero or above, but some configurations can show a negative safety stock. A buffer can also include lost sales and **Covered by incoming**, so safety stock, buffer and the advised quantity are different values.
- **Order up to, stock position and physical stock.** Physical stock is what is on your shelves. **Stock position** is the planning figure Optiply compares with the target. **Order up to** is the target itself. They are three different values.
- **Order up to and the purchase quantity.** **Order up to** is the level Optiply plans towards. The quantity you buy starts from the gap between **Order up to** and **Stock position**. An **Order up to** of 140 units does not mean you buy 140 units.

## Questions customers ask about Order up to

### What is an order up to level?

**Order up to** is the calculated stock target Optiply plans a product towards for the applicable planning period. The purchase quantity is calculated separately using stock position and can then change after purchasing conditions such as MOQ or lot size are applied.

### Why is the purchase advice of my product order up to 230? We sell about 45 per month / why are the order up to and forecast of my product so high?

**Order up to** is not simply a multiple of monthly sales: it covers demand over the applicable planning period with the relevant buffer. Compare the forecast and target for the same period, and review service level, lead time, effective reorder period and forecast demand; these inputs do not by themselves explain a specific value.

### How do I explain the 'order up to level' in Optiply to a layman? I want to explain it to a commercial colleague

It is the full stock target for the applicable planning period: expected demand plus protection for the desired service level. The purchase quantity is separate and starts from the gap between **Order up to** and **Stock position**, before purchasing constraints can change it.

## Related articles on stock position, safety stock and Covered by incoming

- [Stock position](/article/stock-position)
- [Safety stock](/article/safety-stock)
- [Covered by incoming](/article/covered-by-incoming)
