# Manage Assembly orders

Use **Assembly** to review proposals, create and edit drafts, record assembled quantities, and close orders. Choose **Proposed orders**, **Draft orders**, **Active orders**, or **Completed orders**, then use **Search**, **Filters**, **Sorts**, and **Clear filters** to find the order you need. Available actions depend on your webshop settings and permissions. The illustration shows an example layout; your available controls may differ.

## Purpose

Find the right Assembly order, choose the appropriate workflow, and check the result before moving to the next step.

## Understand the order tabs

- **Proposed orders:** review calculated Assembly proposals that have not yet been placed.
- **Draft orders:** continue working on saved order concepts.
- **Active orders:** review open orders, record quantities, and update delivery information.
- **Completed orders:** inspect closed orders.

Numbers beside the tab names reflect the account's order data and can change. Saving a draft, placing an order, recording a receipt, and closing an order are separate actions.

## Open Assembly and find an order

### Purpose

Choose the correct order-status view and find an order without changing it.

### Prerequisites

- Select the intended webshop and confirm that **Assembly** is available.
- You need Assembly View access to inspect orders and Edit access to change them.
- If Assembly is missing, ask your account administrator to check your access and the webshop's enabled features.

### Steps

1. Open **Assembly** from the main navigation.
2. Select **Proposed orders**, **Draft orders**, **Active orders**, or **Completed orders**.
3. Use **Search**, **Filters**, or **Sorts** to narrow the list. Select **Clear filters** to remove applied filters.
4. Use the column-view control on the right above the table to choose and arrange visible fields.
5. Use pagination and **Items per page** below the table when the list spans multiple pages.
6. Select the refresh control on the right above the table if you need to reload the list.
7. Open the intended order and review Supplier, status, dates, quantities, and totals. Compare **In Assembly** and **Assembled** lines where available, then choose the appropriate edit, receipt, export, or close workflow below.

The illustration shows the order tabs, supplier search, manual-order entry point, list controls, and Proposed-order column headings. Order rows and tab counts are not shown.

![Assembly page with Proposed orders, Draft orders, Active orders and Completed orders tabs, supplier search, Create manual order, list controls and column headings.](/screenshots/assembly/orders-and-controls.webp)

### Fields and columns

Columns depend on the selected tab and your saved column layout. In **Proposed orders**, the example includes:

- **Order moment id:** identifies the proposed order moment.
- **Type:** shows the order's planning type or trigger where available.
- **Supplier notes:** provides notes associated with the Supplier.
- **Supplier name** and **Supplier manager:** identify the Supplier and its assigned manager where available.
- **Status:** highlights the proposal's timing status, including overdue proposals.
- **Planned date:** shows when the proposal is planned.
- **Products:** shows the number of products in the proposal.
- **Total value:** shows the displayed proposal value.

Draft lists show saved concepts and their order information. Active and Completed lists can show order and Supplier information, ordered or delivered quantities, dates, value, buyer, notes, and status. Active lists can also show progress and automation information. These fields are not all shown in the Proposed-order illustration.

**Items per page** controls the number of rows displayed; available sizes range from 10 to 200, with an initial size of 50.

### Expected result

The selected tab displays the list for your webshop and filters, or the chosen order opens in its appropriate editor. Reviewing a list or order does not save or place it.

### Limitations

View-only access does not allow order changes. Fields and actions vary by order state and permissions. An empty list can result from filters, pagination, loading, or the selected webshop; it does not necessarily mean that no order exists.

### Errors and recovery

- **No orders appear:** wait for loading to finish, clear filters, check the tab and webshop, then refresh.
- **The list fails to load:** follow the displayed error, check your access or connection, then refresh.
- **An order will not open:** confirm its status, webshop, and your permission before retrying.
- **A quantity looks unclear:** open the order and compare its line information; use the receipt workflow below for Active orders.

## Review, adjust, and place a proposed Assembly order

### Purpose

Review a calculated proposal, adjust its lines when permitted, and either save a draft or continue to placement.

### Prerequisites

- Open an order from **Proposed orders** with Assembly Edit access.
- Check the Supplier, order moment, planning dates, and purchasing limits.
- Wait for **Current order** and **Available products** to finish loading.

### Steps

1. Review the proposed order overview.
2. In **Current order**, search or filter the lines and edit **Quantity** or **Price** when permitted.
3. In **Available products**, select products to add. Remove unwanted current products or phase out eligible products when the controls allow it.
4. Review quantity warnings, Supplier information, estimated delivery date, order value, notes, and purchasing limits.
5. Open **Assembly ready**, if needed, to inspect the displayed component estimate.
6. If you do not intend to order, use **Skip purchase advice** for the current order moment or **Ignore supplier** only after reviewing the applicable confirmation.
7. Select **Save order** to keep a draft, or **Place order...** to open the placement confirmation.
8. Before confirming placement, review the **Expected delivery date**, export settings, and Supplier email options shown.
9. Check **Draft orders** after saving or **Active orders** after placement to confirm the result.

### Fields and columns

- **Current order:** the products currently included in the proposal.
- **Available products:** products available to add.
- **Quantity** and **Price:** the editable line values where permitted.
- **Supplier stock**, **Lot size**, **MOQ**, and planning warnings: information to review before changing quantities.
- **Assembly ready:** displayed component information, including **Quantity per unit**, **Free stock**, and **Incoming stock** where available.
- Supplier, order moment, trigger, estimated delivery date, order value, notes, and purchasing limits provide the order context.
- Expected delivery date, export, and Supplier email options appear in placement where configured.

### Expected result

The proposal remains unchanged, is saved under **Draft orders**, or is placed through the confirmation flow you chose. Verify the resulting order rather than treating an opened confirmation as a completed action.

### Limitations

A proposal is not a placed order. Quantity warnings can highlight differences from the calculated proposal, Supplier stock, Lot size, MOQ, Minimum stock, or **Maximum stock level**; a warning alone does not mean saving is blocked. **Assembly ready** is an estimate, not confirmation that production or stock updates have completed. Skip can be unavailable when the Supplier has no applicable Reorder period. Export and email are separate outcomes to verify.

### Errors and recovery

- **A line cannot be edited:** finish or cancel another edit, wait for loading, and check access and order state.
- **Save or Place is unavailable:** make sure Current order contains products, correct visible validation, and review Supplier information, order moment, and purchasing limits.
- **Skip or Ignore is unavailable:** check the applicable Reorder period and order state; do not substitute manual deletion.
- **Placement fails or the result is unclear:** check Draft and Active orders before retrying to avoid repeating an action that already succeeded.

## Create and save a manual Assembly order

### Purpose

Choose a Supplier and build a manual draft from available products when automatic purchasing is off.

### Prerequisites

- You need Assembly Edit access.
- Automatic purchasing must be off for manual Supplier selection to be available.
- Identify the intended Supplier and products before starting.

### Steps

1. Find **Search for a supplier...** and **Create manual order** above the Assembly list. The illustration shows their location; their availability depends on your settings and access.
2. Search for and select the intended Supplier using the manual-order controls.
3. In the Manual editor, wait for **Available products** and **Current order** to load.
4. Search or filter Available products, then add the intended products to Current order.
5. Remove unwanted lines and edit the visible **Quantity** and **Price** values.
6. Review the lines and totals, then select **Save** to keep the concept.
7. Open the saved concept under **Draft orders** and follow the draft placement workflow below.

### Fields and columns

- **Supplier selector:** identifies who the manual order is for.
- **Available products:** lists products you can add.
- **Current order:** contains the selected lines.
- **Quantity**, **Price**, and order totals: review these before saving. Search, filters, selection, pagination, refresh, and column controls help you work with the tables.

### Expected result

The manual order is saved as a draft for the selected Supplier. Saving the draft does not place it or send it to the Supplier.

### Limitations

The Supplier selector is absent in view-only mode and unavailable while automatic purchasing is enabled. Continue placement from the saved Draft; do not expect a separate **Place Manual** button. Product compositions and Supplier-product relationships are maintained through their relevant Product or Supplier workflows, not by editing Assembly order lines.

### Errors and recovery

- **Manual ordering is unavailable:** check Edit access, automatic purchasing, enabled features, and the selected webshop.
- **A product cannot be added:** check filters, loading, product availability, and its Supplier relationship.
- **Save fails or its result is unclear:** verify line values and totals, then check Draft orders before creating another concept.

## Edit and place an Assembly draft

### Purpose

Adjust a saved concept and use the available save, export, placement, or delete action deliberately.

### Prerequisites

- Find the intended Supplier's concept in **Draft orders**.
- You need Edit access to change lines, place, or delete a draft.
- Wait for both editor tables to finish loading.

### Steps

1. Search, filter, sort, or paginate the Draft list to find and open the intended concept.
2. Review Supplier information, **Current order**, **Available products**, lines, and totals.
3. With Edit access, change Quantity or Price, add available products, or remove current products.
4. Select **Save changes** to keep your edits.
5. Use **Export** where available, saving changes first if prompted.
6. Select **Place order...**, review the placement options, and confirm only when ready. Check Active orders to verify the result.
7. To discard an unwanted draft, use its delete row action and check that it is removed from the list.
8. If leaving with unsaved work, select **Cancel** to stay or **Leave page** only if you accept losing pending changes.

### Fields and columns

- **Product**, **Quantity**, and **Price:** identify the line and its values. Review Supplier stock, Lot size, MOQ, warnings, and totals before saving.
- **Save changes:** retains edits.
- **Place order...:** starts placement. Export and Delete appear where permitted.
- **Options:** in a view-only Draft editor, this can offer **Export as**, but not Save changes or Place order.

### Expected result

Saved changes remain in the Draft, the chosen export or placement completes, or an explicitly deleted concept is removed. Verify the requested outcome separately.

### Limitations

A saved draft is not proof of placement, email delivery, a successful export, or Supplier acceptance. Placement options depend on the concept's planning information. A manually created Draft with neither an order moment nor a planning trigger uses the manual-placement confirmation path; a missing order moment alone does not establish that path. This is not a separate **Place Manual** button. Proposed, Manual, and Draft editors do not provide separate weight or volume input fields.

### Errors and recovery

- **A table is empty:** clear filters, refresh, and check the Draft and Supplier context.
- **Save is unavailable:** correct visible values, wait for loading or another row edit to finish, and check permission.
- **Options is unavailable:** wait for saving and for both Current order and Available products to finish loading, not just the open table.
- **Export or Place fails:** check the current Draft and resulting order before retrying.
- **Delete was selected accidentally:** check the resulting Draft list before taking further action.

## Receive an active Assembly order

### Purpose

Review an Active Assembly order, record the intended quantities and delivery information, and verify the saved result while keeping the order open.

### Prerequisites

- You need Assembly Edit access.
- Open the intended order from **Active orders** and wait for the Delivery editor to load.
- Check the Supplier, order, expected date, and existing quantities before editing.

### Steps

1. Review **In Assembly** and **Assembled** to compare ordered, previously recorded, and remaining quantities.
2. Check the editable quantity field's label and current value before changing it. If it is unclear whether the field expects an additional receipt or a cumulative total, ask Optiply Support before saving.
3. Enter the intended quantity for the applicable line only when that meaning is clear.
4. Update the **Expected delivery date** or other displayed order information where editable.
5. Select **Save changes**.
6. Reload or reopen the order and verify the saved quantities and dates.
7. Use export or email actions only when needed and verify their separate outcomes. Use the close workflow below when no further receipt work should remain open.

### Fields and columns

- **Ordered quantity:** the quantity expected on the line.
- **Received/assembled quantity:** the quantity recorded so far.
- **Remaining quantity:** the portion not yet recorded as received or assembled.
- **Expected delivery date:** the planned date where editing is available.
- **In Assembly** and **Assembled:** line views for the states shown in the editor.
- Product, Supplier, value, status, export, and email-status information can also be available, depending on configuration and order state.

### Expected result

Valid saved quantities and dates remain visible after reopening. The order stays Active until it is closed separately.

### Limitations

Saving receipt changes does not close the order. View-only users cannot edit quantities or dates. Recording a receipt does not by itself confirm every component-stock or output-stock effect. Export and email are separate actions; their controls do not prove external delivery.

### Errors and recovery

- **Fields are locked or an action is missing:** check Edit access, enabled functionality, loading, and whether the order is still Active.
- **Save fails or its result is unclear:** reload and compare saved quantities and dates before correcting values and retrying.
- **You cannot interpret the quantity field or stock result:** stop before recording more units and ask Optiply Support to review the order context. Do not send credentials or secret access links.

## Close an active Assembly order

### Purpose

Move an order out of Active after reviewing its receipts and deciding that no further receipt work should remain open.

### Prerequisites

- You need Assembly Edit access and an Active order.
- Save and verify pending receipt or date changes first.
- Review incomplete lines before selecting **Close Order**.

### Steps

1. Open the intended order from **Active orders**.
2. Review **In Assembly**, **Assembled**, and the ordered, recorded, and remaining quantities.
3. Save pending changes and verify them before closing.
4. Select **Close Order** and read the warning, especially any incomplete lines.
5. Cancel if work should remain open. Confirm only when you deliberately intend to close the order, including any outstanding quantities shown.
6. Open **Completed orders** and verify that the order appears there.

### Fields and columns

- **Close Order:** starts the separate close action; it does not save unsaved receipt edits.
- **Remaining quantity:** helps identify incomplete work.
- **Status:** distinguishes Active from Completed. Completed provides post-close history without actions that apply only to open orders.

### Expected result

After a successful close, the order is no longer Active and can be inspected under Completed orders.

### Limitations

Closing and recording receipts are separate actions. Do not treat closing as automatically receiving every remaining unit or confirming every stock movement. Completed orders do not expose Close Order or open-order Product actions. Completed status alone does not explain every historical quantity change.

### Errors and recovery

- **Close Order is unavailable:** check Active status, Edit access, and loading.
- **The warning shows outstanding quantities:** cancel unless you deliberately intend to close with those quantities outstanding.
- **Closing fails or the result is unclear:** refresh Active and Completed orders and verify the status before retrying. Contact Optiply Support if the result remains unclear; do not repeatedly confirm Close.
